Belt magnetic separator HYCBN series high gradient
High gradient belt magnetic separator is used to process fine ore (fraction less than 2 mm) and separate magnetic matter from ore.
- Non-metal: purification and removal of impurities in quartz, feldspar, kaolin, refractory material.
- Ferrous metal: extraction of martite, hematite, limonite, chalibite, ilmenite and manganese ore.
- Non-ferrous metal: separation of wolframite, leucite, etc.
- Rare metal: extraction of tantalum-niobium ironstone, zinnwaldite, monazite, xenotime, etc.
- Special magnetic circuit design, high magnetic field gradient. The magnetic induction intensity of the magnetic plate surface is in the range of 1.4 T – 2.0 T.
- Large flotation area, reducing the non-magnetic field area and improving the efficiency.
- Tilting mounting. The angle can be adjusted.
- Magnetic field with permanent magnet, needs to be equipped with belt motor to save energy and electricity.
- Automatic unloading of magnetic material, complete separation of non-magnetic material from the unloading pad.
- Simple design, convenient operation and maintenance, low failure rate.
| Model | Width of magnetic plate (mm) | Production capacity (t/h) | Solid substance in pulp | Magnetic field intensity (mT) | Power (kW) | Dimensions (mm), L×W×H | Weight (kg) |
|---|---|---|---|---|---|---|---|
| HYCBN-6 | 600 | 8 | 10% - 30% | Upper surface belt - 900 | 1,1 | 3250 * 1450 * 1580 | 2300 |
| HYCBN-8 | 800 | 10,5 | 1,5 | 3250 * 1580 * 1580 | 2530 | ||
| HYCBN-10 | 1000 | 13 | 1,5 | 3450 * 1750 * 1620 | 3010 | ||
| HYCBN-12 | 1200 | 16 | 2,2 | 3450 * 1950 * 1620 | 3480 | ||
| HYCBN-15 | 1500 | 20 | 2,2 | 3650 * 2250 * 1720 | 3880 | ||
| HYCBN-20 | 2000 | 26,5 | 3,0 | 3650 * 2810 * 1720 | 4450 | ||
| HYCBN-25 | 2500 | 33 | 4,0 | 3650 * 3370 * 1720 | 4450 |
Note: it is possible to manufacture the separator with other magnetic field classes according to the customers requirements, when ordering it is necessary to specify the requirement for the equipment.